Week #21 - June 13th to June 19th - CAN HMI assembly and GUI

Put the entire system into the 3D printed case. Everything is working but a few flaws in our original design became apparent. These will be addressed and fixed for the reprint. Case has a fan that does keep operating temperatures low. 12 V tested on the CAN HMI as well as with the battery.

Some of the issues was the case size in general. There was not enough room to put the battery inside the casing. Wiring was also tight inside of the casing. In general, I think we will go with making the case slightly larger for the final design.

Ultimately finished up this week with some additional coding into the vehicle GUI window.